GET STARTED
FREE PRINT & DIGITAL EDITIONS
Latest articles
by Ken Newell The Zatara refit project began two years ago when my partner Steve Gallo (a mortgage banker) and myself, Ken Newell (a materials engineer), decided that we wanted something to do with our spare time and money. What we didn’t realize was the level to which the refit project would absorb every weekend […]
by Bruce Niederer — GBI Technical Advisor Above: We mixed and applied a third coat thickened with 406 Colloidal Silica Filler to create the texture for the non-skid finish on the deck. This racing season onboard Triple Threat has been filled with the usual mix of tedium, laughs, and excitement. It’s a good thing when […]
For Good Adhesion by Brian Knight—GBI Technical Advisor Above: Sanding the bonding surface is important to good adhesion with epoxy. “Cleanliness is next to Godliness,” the old expression goes. This is certainly true when preparing a surface for an epoxy application. The surface has to be clean to begin with or there may be adhesion […]
Above: The plywood/epoxy sump cover, created by Richard Jobe. It will be buried under pea stone but we think it’s pretty nice looking nevertheless. Richard Jobe was faced with having a sump located in the middle of a prominent landscaped area in front of his Newburgh, Indiana home. His solution was to build a sump […]
Above: The pool pump repair was 100% effective four months later. Barry Bew, a sailing instructor at Arethusa Venture Centre, Gravesend, Kent, UK, used his experience as a plant engineer to make an emergency repair to a swimming pool circulating pump. The pump was leaking at joints between the 3″ ABS plastic inlet and discharge […]
