By Mike Barnard
My father has grown very fond of WEST SYSTEM® Epoxy and his box of epoxy-related items has been growing at a steady rate. The overflow of his box in an already “treasure” packed garage emphasized his need for an organization and storage system for these materials. We have had several requests for this same type of solution lately, so I did some digging and found a great Boatbuilder article from 1986 written by J.R. Watson. Inspired by this article, my father and I built our own interpretation of the Epoxy Caddy.
Transporting epoxy with the 300 Mini-Pumps in the containers is typically awkward with a risk of overturning. The pumps could become damaged, and the alternative, to remove them, is messy and unnecessary. We always store the epoxy with the pumps in place. Inadvertently, a drip will cause a mess. A pot placed under the mini pumps will catch those rascals, but if the containers or the pot are not positioned correctly all’s for naught. The glue caddy solves both transportation and storage problems.
A caddy can be simple or as elaborate as you want. One could design it to become an epoxy work station complete with storage for brushes, stir sticks, hand cleaner, gloves, paper towels and so on. Or it could be designed simply with cutouts for containers and drip pots. One can simplify or expand upon the concept, tailoring to meet your needs.
Set whatever size containers you are going to use together, trace around their bases onto the plywood, and cut it out with a sabre saw. Position the drip pot cutout so it will be under the spouts of the mini pumps. With pots in position, you’re ready to go to work.
|1. Lay out the items you want in
your caddy on a sheet of plywood.
Trace the outline of each item. Be
sure to include a drip cup below
the resin and hardener mini pump
spouts.2. Cut out the shapes of each item
slightly oversized as necessary.3. Add sides, a bottom and a
handle to complete the caddy.