Tag Archives: Mixing small epoxy batches

Smaller Can Be Better

Tips for mixing small batches of epoxy

By Tom Pawlak

My favorite way to mix small batches of WEST SYSTEM® Epoxy, when less than full pump strokes on the mini pumps are required, is by metering resin and hardener into a graduated cylinder made with a plastic syringe. The 807 Plastic Syringes, in our product line, can be modified for this by cutting off the end of the syringe body so it looks like the end of a clear piece of plastic tubing.

For the 5:1 mix ratio needed for 105 Resin and 205 Fast Hardener or 206 Slow Hardener, you’ll need to measure ¼” back from the cut off end of the syringe body and make an Continue reading