Cover photo: Installing some of the assembled FRP louvered panels on the rooftop residence.
Renew Urban Charleston, LLC in Charleston, South Carolina has been using WEST SYSTEM® Six-10 Epoxy Adhesive to glue hundreds of pultruded fiberglass channels and square tubes together to form decorative louvers. When installed on the building, the louver assemblies create an aesthetic detail that draws attention to the unique rooftop residence on King Street in Charleston. Continue reading →
I traveled to the U.P. (that’s what we Michiganders call the Upper Peninsula) on June 7th to attend the graduation ceremony and participate in the yearly on site PAC (Project Advisory Committee) meeting which I currently sit on. I arrived on a beautiful sunny day with temperatures in the mid 70s, a stark contrast from my last trip to the school in mid-April when I awoke to 4” of new snow and 3°F! For those of you who live in the southwest where the temperature has been hot for some time, by contrast, the great lakes finally became 100% ice free the beginning of June. Continue reading →
Here at GBI we’re not just your average epoxy “retailer.” We are the leading provider of quality epoxy products and service. Quality epoxy as in; we dream a big, sticky, epoxy dream, research it, develop it and produce it. Service as in; packed within our 20,000(ish) square foot walls is a wealth of knowledge and experience so vast that it has enabled us to educate hundreds of people worldwide on the features and benefits of West System® epoxy. Spanning from A to Z….Alaska to Zimbabwe. . Yeah, I know. Alaska. Mind. Blown. Continue reading →
I hear it said increasingly often in the last couple years as I meet people during my travels “Who will be the next generation of tradesmen? Who is going to work on our cars, boats and homes?” This is a serious lament posed by today’s tradesmen, potential employers who have a very hard time finding apprentices and workers to learn their trade. The U.S. is in dire need of men and women willing to work with their hands and develop the skills necessary to build and repair all our…stuff. Continue reading →
In my article Profile of an American Craftsman the photos of the Les Staudacher jet-powered boat provide a photographic history of the first and last run of the Tempo Alcoa. What follows are the details of that historic event.
This is the first and only run the jet boat Miss Stars & Stripes II made on the Saginaw Bay.
This was the end result of the run on Hubbard Lake. Dave thought he remembered the boat reaching 267 mph before crashing into the woods somewhere along the western shore.
Les Staudacher fires up the engine which was strapped on a cement pad, right in the middle of a residential neighborhood.
David Black is a creative boat builder, woodworker and artisan living in San Diego California. He is very familiar with all the WEST SYSTEM Epoxy resin/hardener combinations but recently has become a huge fan of G/flex Epoxy.
I love it when David calls because his projects are always interesting. He pushes the envelope of how epoxy can be used. His clients appreciate him too for his creative abilities. Do you have an idea for a new table for your mega yacht? Call David. Need a unique teak deck for your yacht that no one else will even consider installing? Call David. Need someone to design and build a one-of-a-kind interior for your new motor coach? David is your guy. If it is out of the ordinary and it tests the realm of possibility and good reason, count him in. Continue reading →
A dirt bike loading ramp is very bulky and heavy, but important for loading everything you need in motocross. You can just use a wooden board thick enough to support the weight of your bike, or you can buy expensive aluminum ramps. But I (Daryl) wanted to build one and give it a personal touch, making it lighter and stronger. Continue reading →
The goal of fairing is to create a surface without bumps or hollows.
Fairing Compound should be of a consistency that can be troweled onto a surface without sagging. Add 407 Low Density or 410 Microlight filler to mixed epoxy, checking the consistency as you stir in the filler to determine if the mixture has the correct viscosity for your application.
By Alphonso Peluso and his Spring 2014 IIT Architecture Students Joseph Bertucci, Cecilia Campos, Dijon Dunmore, Xinyun Huang, Jared James, Ryan Kim, Dakotah Lucas, Jeffrey McQuiston, Nick Rienstra, Teresita Pineda, John Seaman & Jeffrey Wigen
The FIBERwave PAVILION was designed and built as part of a student-based design research studio. Carbon fiber was used because when coated with epoxy it can become as hard as steel, and added layers enhance its strength. It offers designers great control over structural properties and is incredibly lightweight. Continue reading →
A skiff is a shallow, open boat with a sharp bow and square stern. After building some skiffs of various designs and having the opportunity to observe them over time, I have found details that have worked nicely that might be a value to others. Continue reading →