The Marita is a modern, live edge coffee table made out of a solid 2.25″ thick slab of Canadian Black Walnut salvaged from Essex County, Ontario. The void in the center of this curly black walnut slab was filled with broken safety glass and WEST SYSTEM Epoxy. The table is lit from below with a wireless RGB LED to allow for any color light to be selected. One-of-a-kind, this coffee table is an eye catching conversation piece. Continue reading
By George Gish
My sunflower project began after I’d brought home from the farmer’s market three sunflowers planted in a small barrel. I placed the flowers on the patio outside my kitchen’s sliding glass door. Every time I sat at the kitchen table, I looked out at this bright splash of color and felt pleasantly relaxed. That happy, soothing view ended two days later when deer ate the sunflowers. I wanted my view back, but knew that buying more flowers would just provide another meal for the deer. I decided to re-create the flowers in something they couldn’t eat: glass and bronze. Continue reading
By Don Gutzmer
When using WEST SYSTEM Epoxy as an adhesive it is important to make sure pieces are held in position while the epoxy cures. Here are some tips for best results when clamping. Continue reading
By Greg Ryan
This vardo was an exciting project and design collaboration with my friend Jill. Recently retired, she and her husband were looking for adventure and a home away from home.
Jill and I studied vardos (Romani wagons), modern RV’s, train cars and tiny homes, borrowing elements from each. This vardo is only 8′ x 12′ yet has a queen size bed, bathroom, refrigerator, hot and cold running water, holding tanks, a furnace, AC/DC electricity, a fold-down porch, and plenty of storage. It is solar-powered and completely self-contained. The wagon is insulated as well. Continue reading
By Tom Pawlak
When creating lots of epoxy fillets, a faster way to apply the thickened epoxy is with an 810 Fillable Caulking Tube. It takes a bit of time to transfer the epoxy into the tube, but it is wonderfully efficient for applying epoxy to the joints. Compared to other application methods, it’s also less messy. Continue reading
A Wooden Dory Makeover
By Greg Hatten
In the past few years my river dory, Obsession, has traveled a thousand rocky river miles in all kinds of weather, dodged a million rocks (and hit more than a few) while running rivers in Yellowstone, Tetons, Olympic, Rocky Mountain, Rainier and a dozen other National Parks.
This dory has run backward through a rapid on the Rogue River, run sideways through a rapid on the McKenzie River, and slammed into a wall at Mule Creek Canyon on the Rogue River so hard that it split a rib, shattered an oarlock, and was put out of commission for a month. Continue reading
By Aaron Holmes
For the past ten years I have enjoyed an increasing passion for cycling. It’s the perfect combination of effort and motion for me. I’m fascinated with the details and getting “hands on” with bicycles, both designing and building them. All types of bikes have interested me: road bikes, cross bikes, gravel bikes, mountain bikes, and more. I ride these bikes several thousand miles each year on all types of terrain. Continue reading
By Bruce Niederer
To stay awake at Daryl’s house requires a lot of caffeine—it must if the Box o’ Coffee idea he came up with is any indication. Epoxyworks readers may recall his riveting article in issue 40 Dirt Bike Loading Ramp. Daryl is talented, imaginative and loves to build stuff with carbon fiber.
Inspiration hit him one day after buying a Box o’ Coffee from Tim Horton’s® on his way to teach a motorcycle safety class to aspiring scootertrash. Disappointed that the Tim Horton’s coffee didn’t stay warm very long, he salvaged the Mylar® bag with its built-in cap and built his own insulated box. Continue reading
By Don Gutzmer
During the fall of 2016, I took a technical call from a customer who owned a Sunfish Sailboat. He lived in the area and was looking for help repairing a few minor gel coat cracks and restoring his wooden dagger board and rudder. I told him I would be happy to help because this would be a good opportunity to write an article about using WEST SYSTEM 105 Resin and 207 Special Clear Hardener for the wood restoration part of his project. The mahogany dagger board and rudder had weathered over the years because of only being varnished. Continue reading
By Joe Llewellyn
I am a woodturner working on a wood lathe making various round objects from bowls to bottle stoppers to pens.
I started turning irregular pieces of wood like burls and became frustrated with all the defects in the rotten or punky wood, and the various holes that needed to be filled or stabilized in order to keep the piece together. I started using the WEST SYSTEM 105 Resin and 207 Special Clear Hardener as recommended by the WEST SYSTEM technical advisors. Continue reading